Preparing Pallets for Full-Service®

We frequently receive questions on this topic because mailers are often confused about when (or if), trays and sacks need to be placed onto pallets or other containers such as APC’s or Gaylords for Full-Service mail. Luckily, the United States Postal Service® (USPS®) has recently updated a fact sheet intended to offer guidance to mailers on Full-Service palletization.

Is palletization required for Full-Service?
The short answer is NO. Mailings of loose sacks and trays may be submitted at Full-Service prices as long as all the requirements for Full-Service participation are met. However, if these loose handling units are placed on or into any type of container, that container does need to have pallet placards affixed to the outside of the container, and that placard must be printed with a unique Intelligent Mail® Container barcode. The updated fact sheet from the USPS provides more detail regarding when these loose handling units MUST be placed on or in a container and placarded. These requirements vary by class and processing category of mail.

First-Class Mail®
Pallet preparation and placarding is required for First-Class mail in these scenarios:
• There is 72 feet of tray mail or 24 flat tubs of mail or more
• The mail within the container is prepared according to a labeling list destination and there is at least 48 feet of letter trays or 16 flat tubs or more
• The mailer has an active Customer Supplier Agreement (CSA) in place
• The pallet is flagged in your eDoc as participating in the eInduction program

Pallet preparation and placarding is NOT required – although it is preferred – in these scenarios:
• There is less than 72 feet of trays or 24 flat tubs of mail
• The mail within the container is NOT prepared according to a labeling list destination and there is at least 48 feet of letter trays or 16 flat tubs or more
• The pallet is NOT flagged in your eDoc as participating in the eInduction program

Periodicals, Standard Mail® and Bound Printed Matter

Pallet preparation and placarding is required in these scenarios:
• The mail is equal to or greater than 500 pounds of bundles/sacks or 72 feet of tray mail or 24 flat tubs of mail
• The pallet is flagged in your eDoc as participating in the eInduction program

OR

• The pallet is prepared according to a labeling list destination and is:
-Under 500 pounds of flats entered directly at a DDU
-Between 100 and 249 pounds of bundles/sacks or 12 feet of trays entered at a destination NDC, ASF, ADC or SCF
-Between 250 and 499 pounds of bundles/sacks or 36 feet of trays
-Flagged in eDoc as participating in the eInduction program

Pallet preparation and placarding is NOT required – although it is preferred – in these scenarios:
• The mail is less than 500 pounds of bundles/sacks or 72 feet of trays or 24 flat tubs AND mail within the pallet is not prepared according to a labeling list destination
• The pallet is NOT flagged in your eDoc as participating in the eInduction program

Resources
The updated fact sheet from the USPS is available on the RIBBS web site. Window Book has many utilities available to assist mailers with palletization, including barcoded placards, such as our DAT-MAIL™ software.

Window Book’s newest smart postal solution, PostalWeb™ helps you increase your mailing and PostalOne! productivity. Automate workflow processes for production floor personnel, IT staff, Customer Service Representatives (CSR), distribution manager and accounting department. Systematize the downloading and distribution of critical postal data including; barcoded PostalOne! Confirmation Pages, Unpaid (UPD) and Finalized Postage Statements, financial data from these documents accurately into XML format for integrating into your enterprise reporting systems.

Guide to Postage Assessments

If you’ve been paying attention to previous e-Tips, our newsletters and webinars, you are likely well aware that the United States Postal Service® (USPS®) plans to implement assessments for non-compliance with the requirements for a number of USPS initiatives such as Intelligent Mail® Full-Service, eInduction, Seamless Acceptance and more. Luckily, the USPS has postponed implementation of these assessments until later this year, but many mailers still have questions on just exactly how this assessment process is going to work. Well, you are in luck, because the USPS has just issued a new Guide to Postage Assessment on the RIBBS web site.

What mailings will be impacted?

There are four areas of USPS validation that will be impacted by the implementation of these postage assessments:
• Intelligent Mail Full-Service
• Move Update
• eInduction
• Seamless Acceptance

Any mailings that are evaluated by the USPS in these areas have the potential to be subject to additional postage assessments if mailings exceed the designated error thresholds. These thresholds vary for the individual validations performed by PostalOne!®, the results of which are available to mailers on the Mailer Scorecard. The evaluation results data are collected on a calendar-month basis, and it is the error threshold data for each calendar month that is subject to assessments. For example, the full-service program uses the submitted eDoc to verify the Mailer ID (MID) in a piece’s barcode. A MID error is logged for each piece in the mailing that fails this verification. When the number of MID errors exceeds the established threshold, the eDoc submitter will be assessed on those errors over the threshold for the calendar month. If the percentage of error is below the established threshold or if the additional postage due is less than $50, then no additional postage is assessed. If the percentage of error is above the established threshold, the additional postage due (the assessment) is calculated using the number of mailing pieces represented by the error percentage over the threshold for the calendar month. For example, if the error threshold is 2% and your error percentage is 3%, the assessment would apply to 1% of the mailpieces submitted during the calendar month of the evaluation. The amount of the assessment is based on the type of error, e.g., for Full-Service errors, it is loss of the Full-Service discounts. Using the same example as above, there would be a loss of the Full-Service discounts on 1% of the mailpieces for the calendar month.

Assessment Process
When there are errors above the established thresholds for a calendar month, the USPS will issue an Invoice Report via email notification for the assessment. This invoice report will be sent to the Verification Assessment Evaluator (VAE) designated for the PostalOne! account. That VAE is then responsible to review the invoice report and either make arrangements for payment of the assessment, or request a review by the USPS if the assessment is in dispute. The payment or the request for review must be made within 10 days of receipt of the email notification.

Preparing for Assessment
Mailers should be monitoring their Mailer Scorecard data NOW so that any problem areas can be addressed prior to the implementation date of the assessments. Also, mailers should be working on developing their procedures for handling the invoice reports, assessment payment and USPS review requests so that when this is all implemented, mailers will be able to handle these in a timely manner.

Resources

Window Book has many utilities available to assist mailers with Mailer Scorecard errors, such as our DAT-MAIL™ software, which allows users to make edits to the Mail.dat files to either prevent or correct errors. Also, our automated PostalOne! transmission utility, EDM10X™, which not only automates the transmissions, but its QuickFix capability allows for quick, easy correction of errors. And, we offer tailored consulting services, including on-site services, to help mailers better understand their Mailer Scorecard data and how to improve their scores.

Window Book’s newest smart postal solution, PostalWeb™, completes the PostalOne! automation circle by providing easy downloading of finalized PostalOne! postage statements directly to your servers, and includes options for email notifications and even emailing of these finalized postage statements! And now available: automatically download your barcoded confirmation pages!

Improving Your Mailer Scorecard Results

Alright, alright, alright. So you’ve ramped up all your processes and systems for participation in Intelligent Mail Full-Service®, or at least for participation in eDoc. You’ve successfully submitted Mail.dat® files to PostalOne!® and have worked through the various validation errors or file rejections that you received when you first started this process. So, you’re golden, right???

Well, not so fast….even if your files are successfully transmitted to PostalOne!, that does not necessarily mean there are not still errors in your files. That’s right…errors can still exist, even if you don’t receive any error messages from PostalOne! How the heck are you supposed to find out what these errors are? That is where the Mailer Scorecard comes in.

Mailer Scorecard
Just like a report card back from your school days, the Mailer Scorecard tells you how you are doing as a mailer. The Mailer Scorecard, available on the USPS® Business Customer Gateway, provides a wealth of information and reports on your electronically submitted mailings.

The Mailer Scorecard includes a Mailer Information tab, which includes all the data regarding your mail volumes, breaking it down by class of mail, processing category and so forth. In addition, there are tabs for Full-Service validation, eInduction validation, and Seamless Acceptance validation. On each of those tabs is detailed information on the items that PostalOne! is validating, including the validation results on your mailings. The information on the Mailer Scorecard is tallied on a calendar month basis. The data is even color coded to help you hone in on any problem areas. For example, anything in green text means that your validation results have improved by 5% or more over the previous calendar month. Text in red indicates that your validation results have declined by 5% or more over the previous calendar month. And any items highlighted in yellow are areas where your mailings have exceeded the allowed error threshold.

For now, all of this data is informational only, intended to help mailers pinpoint areas where their mailings have quality issues so that mailers can take corrective action. However, some time later this year, likely in July, the USPS plans to start implementing postage assessments for mail that exceeds the allowed error thresholds. Bottom line, mailers need to be paying attention to their Mailer Scorecard results NOW so that any necessary process improvements may be made BEFORE those assessments kick in.

Common Mailer Scorecard Errors
One of the most common Mailer Scorecard errors for Full-Service validation is with the By/For information, which is the identification of the various entities involved in the mailing. The “For” part of this equation is the Mail Owner, or the entity responsible for the content of the mailpiece and who ultimately benefits from the mailing. The “By” part of the equation is the Mail Preparer (the entity physically preparing the mailing) and the eDoc Submitter (the entity submitting the Mail.dat files to PostalOne!).

All of these entities must be correctly identified in the Mail.dat files submitted to PostalOne! Typically, this identification is done using the Customer Registration ID (CRID) or Mailer Identification (MID). There is a variety of fields in the Mail.dat file where this data may be populated, so it is very critical that mailers understand where these fields are located, how to get them correctly populated, and to make sure there are no conflicts with this data. This, of course, assumes that you even have the correct CRID and MID data to begin with. Luckily, the USPS offers search capability on the Business Customer Gateway, so that mailers may validate the CRID/MID information. This search capability is provided for both individual searches and bulk searches, where files containing CRID or MID information for multiple clients may be submitted at one time for validation.

Correcting Mailer Scorecard Errors
Once you have analyzed the data available on your Mailer Scorecard, it is important to use this data to review your mailing process to determine where in your process these errors are occurring and make any necessary changes. The Mailer Scorecard includes a “drill down” function that allows users to drill down to the specific mailing jobs with errors and then to the specific errors. The Mailer Scorecard will provide error codes and a recommended solution. The error codes can also be looked up in the PostalOne! technical guides.

Some of the error messages, however, might be a little cryptic, so you may need to submit a ticket to the PostalOne! Help desk to ask for help in deciphering the error message and, more importantly, how to correct the error. Your presort and post-presort software vendors can also be helpful in this area.

Resources
The PostalOne! Help Desk is available to provide assistance to mailers who need help in understanding the Mailer Scorecard data and the various error messages. They can also help you trouble-shoot errors in submitted Mail.dat files. There is a guide available for making a request for more detailed Mailer Scorecard error data.

Window Book has many utilities available to assist mailers with improving their Mailer Scorecard results. Our DAT-MAIL™ software provides easy access to make edits and corrections in Mail.dat files, particularly with regard to the often troublesome By/For data. DAT-MAIL also includes a BCG Export and Import utility, both of which may be used to easily take advantage of the bulk search capability on the BCG for your clients MID, CRID, permit and Nonprofit Authorization data. We also offer educational webinars on the Mailer Scorecard, and even offer FREE Mail Optimization Analyses to help you get your mailing operation optimized to submit mailings electronically. We even provide on-site or remote consulting services to help you review your Mailer Scorecard results and help you pinpoint areas in your process where the corrections may be made.

Don’t miss out on our educational mailing webinars! Log on to our webinar registration site to sign up.

Window Book’s newest smart postal solution, PostalWeb™, completes the PostalOne! automation circle by providing easy downloading of finalized PostalOne! postage statements directly to your servers, and includes options for email notifications and even emailing of these finalized postage statements! (Coming soon: automatically download your confirmation pages!)

Mail Drives Mobile Commerce Promotion

Yet another USPS® incentive promotion is rapidly approaching – Mail Drives Mobile Commerce Promotion. This promotion starts running on November 1, 2014 through the end of the year (December 31, 2014), but the registration for this promotion started on September 15, 2014.

Mail Drives Mobile Commerce Promotion
The goal of this promotion is to promote use of mobile technology in direct mail to create a convenient method for consumers to do their shopping. This promotion is offered to Standard Mail™ (including non-profit) Letters and Flats mailings that use mobile barcode technology on the mailpieces which, when scanned by a mobile device, leads to a mobile optimized web site.

The incentive is a 2% up front postage discount, which is calculated in PostalOne!® and applied to the postage statement at the time of mailing. Mailers may also be eligible for an additional one percent rebate on the postage of their qualifying mailings if a portion of their orders are fulfilled via Priority Mail® between November 3, 2104 and January 15, 2015. Mailers who wish to participate in the Priority Mail rebate must complete a separate claim form that is due no later than February 15, 2015.

The registration period for this promotion started September 15, 2014 and runs through December 31, 2014. As a reminder, the promotion period runs from November 1, 2014 through December 31, 2014.

Eligibility
Eligible mail pieces must include a mobile barcode or other equivalent print/mobile technology that when scanned by a mobile device, leads to a mobile optimized web site. The destination web pages must reside on a web site platform that contains or is deeply integrated with a checkout functionality that allows the customer to complete the purchase of the product referenced in the mailpiece through a complete mobile optimized experience.

• Mailpieces must contain an Intelligent Mail® Full-Service barcode.
• Directional copy must be included near the mobile barcode on the mailpiece providing guidance to the consumer to scan the barcode or image and information about the landing page.
• For purposes of this promotion, a product is defined as a tangible and physical item that needs to be distributed or manufactured and can be shipped via a mailing or shipping product offered by the USPS (delivery by the USPS is not required).
• Mailings must be submitted via eDoc using Mail.dat®, Mail.XML™ or the Postal Wizard. The eDoc must identify the mail owner and mail preparer in the By/For fields using the CRID, MID, or Permit number.
• All pieces covered by a postage statement claiming the discount must meet all eligibility requirements.
• Mail must be tendered for acceptance during the promotion period of November 1, 2014 through December 31, 2014.
• Postage payment for the eligible mailings must be paid using Permit Imprint or Pre-canceled Stamp permit. Some Meter Permit mailings may qualify.

More detailed program requirements are available online, as well as a Mail Owner enrollment guide and a Mail Service Provider enrollment guide.

Additional information
More detailed information regarding these upcoming promotions can be obtained at the USPS RIBBS® web site, or questions may be directed via email to MailDrivesMobile@usps.gov.

Window Book is here to help
Window Book’s industry-leading post-presort solution, DAT-MAIL™, can help you take advantage of these USPS incentive promotions. To schedule a free Mail Optimization Analysis, visit www.windowbook.com/MOA.

More Changes This Fall 2014: Understanding How They Affect You

The August 24, 2014 PostalOne!® update, which coincided with the new Mail.dat® 14-2 release, included many changes and updates to Postal services and postage statements among other things. In addition, the United States Postal Service® (USPS®) will be issuing another PostalOne! software update on November 9, 2014. The November update does not have any postage statement or Mail.dat modifications, but there are changes that may have an impact on your operations. Make note of the recently enacted and upcoming changes.

Highlights from the recent August Update

Changes to Mailing Services

Postage Statement Changes

There are changes in postage statements for Periodicals, First-Class Mail®, and Standard Mail®. With the exception of the Priority Mail statements, which will be mandatory due to the price changes, mailers may continue to use the January 2014 postage statements. However, if you wish to use any of the new products and/or services, you must switch to the September 2014 statements.

New Mail.dat version 14.2
There is a new Mail.dat specification version associated with this update; the current version is 14-1; while the new Mail.dat version is 14-2. For purposes of submitting Mail.dat files to PostalOne!, the table below shows the various Mail.dat versions and the dates on which they are supported by PostalOne!

Between August 24 and September 7 mailers can submit new mailings using Mail.dat version 14-2 or 14-1. During this period, mailings can also be submitted using 13-1, but ONLY for mail with mailing dates processed before Sept. 7. Between Aug. 24 and Sept. 7, mailers can also submit 13-1 files to update previously submitted mailings.

Political and Election Mail
The new 14-2 Mail.dat version now has fields in the Content Characteristics Record (CCR files) to identify political and election mail. These identifiers should be used only if 100% of the mailing contains these types of mail. This will then allow the appropriate postage statement check box to be marked, and will also indicate to mailers and the USPS that special tags are to be applied to this mail. Use Tag 57 for Political Mail and Tag 191 for Election Mail.

Is 14-2 mandatory?
The use of Mail.dat 14-2 is not mandatory. Mailers can continue to submit 14-1 files to PostalOne! DAT-MAIL’s new August update supports submission of either file format. Mailers can import 14-1 and 14-2 files and submit 14-2 to PostalOne!, but can not import 14-2 and submit 14-1.

DFSS:

Effective August 1st a new PS-8125 form became available that supports Flat Sequencing System (FSS) entry points. In the new PS-8125 Form, under the Mailer Information section, DBMC has been removed and DNDC and DFSS have been added for “Entry Discounts Claimed” options. Note: the old 8125 form can still be used for 6 months until further notice.

Air Boxes:
Although not mandatory, mailers who use Air boxes are being strongly encouraged by the USPS to update to DAT-MAIL’s new August update so they can generate new PS-8125 forms. Air boxes are an alternate container from trays/sacks/pallets that Periodicals mailers use to get mail drop shipped in an expedited manner for time-sensitive materials.

Priority Mail:
Priority mailers using Mail.dat must update to DAT-MAIL’s new August update in order to be able to use new rates and generate Postage Statements, which are effective September 7, 2014.

New 8125
The August release of DAT-MAIL includes the new 8125 which should be used by mailers that do the following:
-Drop ship to DFSS facilities
-Use air boxes (Periodicals mail)
-Use DAT-MAIL to mail Priority Mail eDoc

Full-Service eDoc Verification & Invoicing
PostalOne! reports for Intelligent Mail® Full-Service verification will have postage charges for non-compliance visible on the reports, but the USPS will NOT actually be assessing these charges. Not yet, anyway! But, mailers need to pay very close attention to these reports because it is only a matter of time before the USPS does implement these charges.

Changes to Shipping Services

Priority Mail® Price Changes
Great news for shippers who are eligible for Commercial Base and Commercial Plus rates. Effective September 7, 2014 those rates are decreasing! The new Postage Statements reflecting these price changes are available at pe.usps.gov.

-Commercial Base: 0.9% average decrease
-Commercial Plus: 2.3% average decrease
-Retail prices: 1.7% average increase

IMpb Compliance Threshold Increases
The USPS is already charging a non-compliance fee for Intelligent Mail Package Barcode (IMpb) mailings. This fee is $.20 per piece, and can add up in a real hurry if you mail any sort of volume at all. The compliance threshold to avoid those fees is increasing as well.

Single piece parcel shipments
Good news! Mailers will now be able to use their volumes from multiple classes of mail to meet the volume minimums for parcel shipments mailed using Manifesting with a Permit Imprint payment method. The minimum volume is 50 pieces or 50 pounds, which used to apply to each class of mail separately. Now, volumes from various classes of mail can be combined to meet this minimum.

IMpb requirement changes:
Mailers will now need to use Intelligent Mail Package Barcodes (IMpb) on more categories of mail. This requirement includes Standard Mail parcels, Parcel Select Lightweight, and the remaining portions of Priority Mail previously exempted from IMpb.

Changes to USPS Data

Labeling List Update Frequency Changes to Monthly
Previously, these files were updated on a quarterly basis, but this is changing to a MONTHLY cycle starting in August. The USPS announced changes to the Labeling List data, effective September 1, 2014, with a mandatory use date of September 30, 2014.

Mailers need to be much more vigilant about using these updated files since they will no longer be able to presort their mailing list files months in advance. There will only be two months of Labeling List data permitted at any given time, which means presorts cannot be performed more than 60 days in advance of the estimated date of mailing.

This means that the estimated and actual ship dates in the Mail.dat files become MUCH more critical. These are the dates that will be used to validate that the correct Labeling List files have been used, so it’s essential for mailers to accurately populate those data fields.

HUB list: There is a new Labeling List going into effect called the HUB list. This is a list of postal facilities that just cross-dock or transfer mail, and do not do any actual mail processing. These facilities are intended to be used by mailers to improve mail delivery by drop shipping to these hubs, which will then cross-dock the mail to outbound transportation bound for the final destination facility.

Upcoming Changes

PostalOne!® November 9 Update
The second PostalOne! update, originally scheduled for October 26, 2014, is now November 9. The November 9 update does not have any postage statement changes, but there are other changes associated with postage statement mail owner CRID display, Nonprofit authorization numbers, Postage assessment of Seamless Acceptance errors, Move Update, new functionality for the Business Customer Gateway (BCG) and Mailer ID. Visit November 2014 changes for more details.

Mail Entry Road Map

The USPS has published its “Mail Entry Road Map” showing mailers what is in store for them with changes to acceptance, verification and payment between now and mid-2015.

September 2014 – eInduction pilot of a scan process for non-SV sites starts. If successful, this will be rolled out in early 2015 and allow all entry points to participate in eInduction without having to link pallet barcodes to FAST appointments.

October 2014 – Full-Service Verification Error Postage Assessments will be visible to mailers; however, they will not actually be billed until January 2015 (based on December 2014 data). Pay attention to these assessments and correct what is causing them before December!

October 2014 – Mailers will need be processing and submitting 75% of their eligible mail as Full-Service if they want to retain their DMUs.

November 2014 – PostalOne! Release 39 – many changes here. This is the first release that will use actual induction date as the basis of verifying the validity of the labeling list used to do the presort. There are also expected to be a number of changes that will impact all mailers doing eDoc. Watch for Window Book webinars and subsequent communications about the changes coming in PostalOne! Release 39.

Stay Informed
Learn more about Postal Changes for Fall 2014 from Free Educational Resources:

Webinar Recording:

USPS Changes for Fall 2014: Do you know what they are?
http://www.windowbook.com/recordedwebinars

White Paper:

Changes are Coming in 2014: Do You Know What They Are?
https://www.windowbook.com/Lp/USPS-2014-Changes

Avoid Getting an Invoice for Full-Service Errors: Keep Track of Your Mailer Scorecard

Do you ever wonder how your mailings measure up to all the latest United States Postal Service® (USPS®) requirements?

How can you be sure if you are meeting all the requirements or barely meeting the thresholds set by the USPS?

Did you know that the USPS will implement financial penalties as early as July 2014 for Full-Service mailings not meeting the requirements?

Now the USPS has a new reporting system called the “Mailer Scorecard.” That’s right. You get scored on how well or badly you are performing when processing mailings using USPS programs. The Mailer Scorecard is a report that tracks your mailing performance trends across months and years for various USPS programs.

The Scorecard provides a complete summary of performance for Full-Service Electronic, eInduction, Seamless Acceptance, Mail Anywhere™ and SingleSource ACS™. You can easily view the metrics in numbers and percentages on a dashboard by logging in through the USPS Business Customer Gateway: https://gateway.usps.com/eAdmin/view/signin.   Once logged in, select Mailing Reports and then Mailer Scorecard.

Use it to your advantage

Each month your mailings will be aggregated to create your scores, and the areas which need attention will be highlighted in Green, Red, and Yellow….

Read more: http://www.windowbook.com/Learning/Mailing-and-Shipping-Articles-of-Interest

Free Educational Webinar: Common PostalOne!® Errors: Understanding and Correcting

The United States Postal Service® is continuously launching new programs which require using the PostalOne! system such as Full-Service, USPS® promotions and incentives, eInduction, and Seamless Acceptance just to name a few.

If you submit mailings to PostalOne! you know how stressful and time consuming it can be to monitor all the jobs you have uploaded to PostalOne!, not to mention if your submissions incur failures! If you have the right tools, you can quickly fix validation errors and easily resubmit files to retain postage discounts, and maintain operational consistency.

Come join us for an informative webinar (including a live demo!) on some of the frequently encountered validation errors mailers experience on PostalOne!, and how you can easily make corrections using DAT-MAIL™. Make sure to bring questions you may have when processing eDoc!

 

Tue, Jul 1, 2014 2:00 PM – 3:00 PM EDT

Reserve your seat at:

https://www1.gotomeeting.com/register/128525560

Correcting By/For Errors in eDoc

As more mailers are now starting to pay closer attention to their Mailer Scorecard on PostalOne!®, a common issue that shows up on their scorecards is By/For errors. So, you ask, what the heck is “By/For” and how do mailers get these errors to go away?

By/For
For Full-Service mailings, the United States Postal Service® (USPS®) requires that electronic documentation (eDoc) includes identification of the Mail Owner, the Mail Preparer, and the eDoc Submitter. This is often referred to as the “By/For” data: the Mail Preparer is the company who is preparing the mail (the “By” part) and the Mail Owner is the company responsible for the content of the mailpiece and receives the benefit of the mailing (the “For” part). Likewise, the eDoc Submitter is the company submitting the electronic documentation (“By”) for the Mail Owner (“For”). All of these entities are identified in the eDoc using their Mailer ID numbers (MIDs) or Customer Registration ID Numbers (CRIDs). For companies preparing and submitting their own mailings, all of these entities may be the same company. For companies that use Mail Service Providers, these three entities may be three different companies.

Where is the data?
The MID and CRID data used to identify the Mail Owner and Mail Preparer in the mailing is located in the Mailer Postage Account (MPA) file of the Mail.dat® file. The CRID data to identify the eDoc Submitter is located in the Header (HDR) file of the Mail.dat file. The eDoc Submitter data is also located in the Segment (SEG) file, but that is for mailing industry use; PostalOne! uses the data in the Header file.

Read more.

 

Full-Service Certified MSPs

The list of certified MSPs is updated weekly; To ensure that you have the most current list of certified MSPs visit https://ribbs.usps.gov/index.cfm?page=intelligentmail

Read more.

Via USPS RIBBS

Intelligent Mail package barcodes (IMpb) Webinar Series: Returns Containing Mailable Hazardous Materials

Intelligent Mail package barcodes (IMpb) Webinar Series

Returns Containing Mailable Hazardous Materials

May 13, 2014 at 10 a.m. (EDT)

This webinar outlines the new requirements for the use of Service Type Codes and Shipping Service File indicators relative to mailable hazardous and perishable material. We will also briefly discuss packaging and marking requirements for these materials.

Please visit the USPS Industry Outreach website to view the upcoming webinar schedule and webinar archive presentations.

Instructions for participating in the webinar appear below:

Attendee Information:
Event number: 993 015 716
Event address for attendees: https://usps.webex.com/usps/onstage/g.php?d=993015716&t=a
——————————————————-
Teleconference information
——————————————————-
U.S./Canada Attendee Dial-in: (888) 890-1547
Conference ID: 7015413