eInduction

In November 2013 the USPS® opened a new program to mailers called eInduction. eInduction is intended to replace the current hard copy PS Forms 8125 and 8017 clearance documents used for drop shipments of origin and destination mail. This is all part of a continuing effort by the USPS to convert hard copy postal documentation into eDoc. Since the program began, the USPS has equipped acceptance facilities with scanners, which scan the container barcodes to ascertain whether or not the containers have been properly verified and paid for at the origin post office. They continue their efforts to equip more and more facilities with these scanners.

How eInduction Works
With eInduction, the mailer tells the USPS that a pallet is “eInduction” by populating the “CSM eInduction Indicator” in the Mail.dat® pallet record with a “Y”. This can be done in the original PostalOne!® submission, the “ready to pay” submission or even in a “transportation update” after the postage is paid. When PostalOne! sees that a pallet is flagged for eInduction, the information about that pallet is pushed to the entry facility that is going to be inducting the mail, thereby making it available to the wireless “Surface Visibility” scanners at that facility. When a load arrives with eInduction pallets, the USPS personnel can scan the pallet and instantly know whether it is in the right place and that it has been paid for – no 8125 required at all. The date-and-time stamped scan – or “start-the-clock” event – is also provisioned back to the mailer as part of the Full-Service data they are entitled to receive (if the contents of the pallet are Full-Service qualified mail). This information is also available in the Facility Access and Shipment Tracking (FAST) as part of the close-out information for that appointment.

It’s important to note that it is also possible to do eInduction if the entry facility is not equipped with Surface Visibility scanners. The induction process uses updated Intelligent Mail® Data Acquisition System (IMDAS) software. At these sites, the USPS acceptance employees use IMDAS scanners to scan the IM container barcode and collect the appointment data. No validations take place at the entry point at Non-SV locations.

What’s In It For Me?
There are a number of reasons you will want to participate in eInduction:
1. To reduce the number of PS8125 and PS8017 forms you need to print and have “round stamped”.
2. To reduce or eliminate the rejection of shipments by an entry facility for problems with 8125 forms or other reasons. This is a benefit even if you ship mail to a consolidator under a Drop Shipment Manifest System (DSMS) agreement.
3. To streamline your mail induction process. Using this process speeds up processing of this mail, as it eliminates the need for postal clerks to manually reconcile containers against paper documentation, and it enables quicker appointment processing in FAST.
4. To obtain more reliable and timely information about the induction of your pallets through MicroStrategy Reports. Mailers have tools to actively manage their accounts and understand what is happening to their mail at the container level.

If you are shipping under a DSMS agreement, you currently don’t have to create 8125 forms. You would still enjoy the other three advantages listed above if you helped your consolidator take advantage of the eInduction program.

Participation
To participate in this program, you must notify the USPS that you wish to participate in eInduction. To do this, call the FAST Help Desk at 1-877-569-6614 and provide your name, company name, address, phone number and eDoc Submitter CRID. The USPS will make sure that your DMU clerks are properly trained for eInduction and will also help you set up a login to access special MicroStrategy reports for eInduction users. Following the training of your DMU or BMEU clerk, your CRID will be activated for eInduction and you will be notified that you are authorized to participate. You should also contact your postal logistics carrier and find out what documentation they would like you to provide for your eInduction pallets. DAT-MAIL users can simply provide them with an 8125 that says “eInduction” on it instead of being round-stamped (see example below), or you can still provide them with a round-stamped 8125 if they require it. If you provide a regular 8125, it will be very important to enable the option to print “eInduction” on your eInduction pallet placards.

Additional information

For more detailed information on the eInduction program, download the Postal Service eInduction Guide for Mailers. There is also a guide to the Microstrategy Reports for eInduction. Mailers may also check with their District Business Mail Entry office to obtain more information or to ask questions.

Getting Help From the Window Book Experts
Window Book can help you participate in eInduction using our DAT-MAIL solution. Window Book also offers our Mailing Optimization Analysis. Call us at 1-800-524-0380 for more details or to sign up for your FREE Mail Optimization Analysis!

Drop Shipping to Additional Entry Points?

If you drop ship mail to additional entry points, you definitely need to check out eInduction, the United States Postal Service® (USPS®) program to replace the current hard copy PS Forms 8125 and 8017 clearance documents used for drop shipments of origin and destination mail. Not only does this program eliminate these pesky hard copy postal forms, but it can actually speed up verification, acceptance, and loading of your drop ship mail.

Join Window Book for a FREE informative webinar on eInduction and discover what eInduction is, how to participate in eInduction, and the benefits of this program. Moreover, we will show you how easy it is to implement eInduction in your mailing operation using DAT-MAIL.

Register: https://www.windowbook.com/Lp/webinarreg?key=2813579149982307586

Tuesday, December 09, 2014
2:00 PM EST

Join the electronic evolution – come and learn the Benefits of Using eInduction!

More Changes This Fall 2014: Understanding How They Affect You

The August 24, 2014 PostalOne!® update, which coincided with the new Mail.dat® 14-2 release, included many changes and updates to Postal services and postage statements among other things. In addition, the United States Postal Service® (USPS®) will be issuing another PostalOne! software update on November 9, 2014. The November update does not have any postage statement or Mail.dat modifications, but there are changes that may have an impact on your operations. Make note of the recently enacted and upcoming changes.

Highlights from the recent August Update

Changes to Mailing Services

Postage Statement Changes

There are changes in postage statements for Periodicals, First-Class Mail®, and Standard Mail®. With the exception of the Priority Mail statements, which will be mandatory due to the price changes, mailers may continue to use the January 2014 postage statements. However, if you wish to use any of the new products and/or services, you must switch to the September 2014 statements.

New Mail.dat version 14.2
There is a new Mail.dat specification version associated with this update; the current version is 14-1; while the new Mail.dat version is 14-2. For purposes of submitting Mail.dat files to PostalOne!, the table below shows the various Mail.dat versions and the dates on which they are supported by PostalOne!

Between August 24 and September 7 mailers can submit new mailings using Mail.dat version 14-2 or 14-1. During this period, mailings can also be submitted using 13-1, but ONLY for mail with mailing dates processed before Sept. 7. Between Aug. 24 and Sept. 7, mailers can also submit 13-1 files to update previously submitted mailings.

Political and Election Mail
The new 14-2 Mail.dat version now has fields in the Content Characteristics Record (CCR files) to identify political and election mail. These identifiers should be used only if 100% of the mailing contains these types of mail. This will then allow the appropriate postage statement check box to be marked, and will also indicate to mailers and the USPS that special tags are to be applied to this mail. Use Tag 57 for Political Mail and Tag 191 for Election Mail.

Is 14-2 mandatory?
The use of Mail.dat 14-2 is not mandatory. Mailers can continue to submit 14-1 files to PostalOne! DAT-MAIL’s new August update supports submission of either file format. Mailers can import 14-1 and 14-2 files and submit 14-2 to PostalOne!, but can not import 14-2 and submit 14-1.

DFSS:

Effective August 1st a new PS-8125 form became available that supports Flat Sequencing System (FSS) entry points. In the new PS-8125 Form, under the Mailer Information section, DBMC has been removed and DNDC and DFSS have been added for “Entry Discounts Claimed” options. Note: the old 8125 form can still be used for 6 months until further notice.

Air Boxes:
Although not mandatory, mailers who use Air boxes are being strongly encouraged by the USPS to update to DAT-MAIL’s new August update so they can generate new PS-8125 forms. Air boxes are an alternate container from trays/sacks/pallets that Periodicals mailers use to get mail drop shipped in an expedited manner for time-sensitive materials.

Priority Mail:
Priority mailers using Mail.dat must update to DAT-MAIL’s new August update in order to be able to use new rates and generate Postage Statements, which are effective September 7, 2014.

New 8125
The August release of DAT-MAIL includes the new 8125 which should be used by mailers that do the following:
-Drop ship to DFSS facilities
-Use air boxes (Periodicals mail)
-Use DAT-MAIL to mail Priority Mail eDoc

Full-Service eDoc Verification & Invoicing
PostalOne! reports for Intelligent Mail® Full-Service verification will have postage charges for non-compliance visible on the reports, but the USPS will NOT actually be assessing these charges. Not yet, anyway! But, mailers need to pay very close attention to these reports because it is only a matter of time before the USPS does implement these charges.

Changes to Shipping Services

Priority Mail® Price Changes
Great news for shippers who are eligible for Commercial Base and Commercial Plus rates. Effective September 7, 2014 those rates are decreasing! The new Postage Statements reflecting these price changes are available at pe.usps.gov.

-Commercial Base: 0.9% average decrease
-Commercial Plus: 2.3% average decrease
-Retail prices: 1.7% average increase

IMpb Compliance Threshold Increases
The USPS is already charging a non-compliance fee for Intelligent Mail Package Barcode (IMpb) mailings. This fee is $.20 per piece, and can add up in a real hurry if you mail any sort of volume at all. The compliance threshold to avoid those fees is increasing as well.

Single piece parcel shipments
Good news! Mailers will now be able to use their volumes from multiple classes of mail to meet the volume minimums for parcel shipments mailed using Manifesting with a Permit Imprint payment method. The minimum volume is 50 pieces or 50 pounds, which used to apply to each class of mail separately. Now, volumes from various classes of mail can be combined to meet this minimum.

IMpb requirement changes:
Mailers will now need to use Intelligent Mail Package Barcodes (IMpb) on more categories of mail. This requirement includes Standard Mail parcels, Parcel Select Lightweight, and the remaining portions of Priority Mail previously exempted from IMpb.

Changes to USPS Data

Labeling List Update Frequency Changes to Monthly
Previously, these files were updated on a quarterly basis, but this is changing to a MONTHLY cycle starting in August. The USPS announced changes to the Labeling List data, effective September 1, 2014, with a mandatory use date of September 30, 2014.

Mailers need to be much more vigilant about using these updated files since they will no longer be able to presort their mailing list files months in advance. There will only be two months of Labeling List data permitted at any given time, which means presorts cannot be performed more than 60 days in advance of the estimated date of mailing.

This means that the estimated and actual ship dates in the Mail.dat files become MUCH more critical. These are the dates that will be used to validate that the correct Labeling List files have been used, so it’s essential for mailers to accurately populate those data fields.

HUB list: There is a new Labeling List going into effect called the HUB list. This is a list of postal facilities that just cross-dock or transfer mail, and do not do any actual mail processing. These facilities are intended to be used by mailers to improve mail delivery by drop shipping to these hubs, which will then cross-dock the mail to outbound transportation bound for the final destination facility.

Upcoming Changes

PostalOne!® November 9 Update
The second PostalOne! update, originally scheduled for October 26, 2014, is now November 9. The November 9 update does not have any postage statement changes, but there are other changes associated with postage statement mail owner CRID display, Nonprofit authorization numbers, Postage assessment of Seamless Acceptance errors, Move Update, new functionality for the Business Customer Gateway (BCG) and Mailer ID. Visit November 2014 changes for more details.

Mail Entry Road Map

The USPS has published its “Mail Entry Road Map” showing mailers what is in store for them with changes to acceptance, verification and payment between now and mid-2015.

September 2014 – eInduction pilot of a scan process for non-SV sites starts. If successful, this will be rolled out in early 2015 and allow all entry points to participate in eInduction without having to link pallet barcodes to FAST appointments.

October 2014 – Full-Service Verification Error Postage Assessments will be visible to mailers; however, they will not actually be billed until January 2015 (based on December 2014 data). Pay attention to these assessments and correct what is causing them before December!

October 2014 – Mailers will need be processing and submitting 75% of their eligible mail as Full-Service if they want to retain their DMUs.

November 2014 – PostalOne! Release 39 – many changes here. This is the first release that will use actual induction date as the basis of verifying the validity of the labeling list used to do the presort. There are also expected to be a number of changes that will impact all mailers doing eDoc. Watch for Window Book webinars and subsequent communications about the changes coming in PostalOne! Release 39.

Stay Informed
Learn more about Postal Changes for Fall 2014 from Free Educational Resources:

Webinar Recording:

USPS Changes for Fall 2014: Do you know what they are?
http://www.windowbook.com/recordedwebinars

White Paper:

Changes are Coming in 2014: Do You Know What They Are?
https://www.windowbook.com/Lp/USPS-2014-Changes